If you are searching lorus watch how to set time, you are usually dealing with one of two styles: a Lorus analog watch (hands) or a Lorus digital watch (screen with buttons). The steps are simple once you know what each button does, and the good news is that most models follow the same logic.

This guide covers how to set lorus digital watch, lorus watch set time on common 4-button layouts, and what to do when lorus watch how to change time feels confusing. It also includes lorus watch date adjustment and quick tips for water resistant models.

Before you start: identify your Lorus type in 5 seconds

• Analog: has hour/minute hands (maybe a seconds hand) and a crown.
• Digital: shows time on a display and has 3-4 buttons (often labeled light, mode, start/stop, set).

If you have a sporty digital model and you typed something like k sport watch how to set time or c sport watch how to set time, the process below is still the right one – many sport-style digital watches use the same button pattern as Lorus.

How to set the time on a Lorus watch (analog models)

If your search was how to set the time on a lorus watch or how to set time on lorus watch and your watch has hands, do this:

1. Pull the crown out.
   • On many models you will feel two clicks: the first is often for the date, the second is for time.
2. Turn the crown until the hands show the correct time.
3. Push the crown back in fully so the watch is sealed for daily wear.

Quick AM/PM check (helps if date changes at the wrong time)

If the date changes around midday, the watch is set 12 hours off. Move the hands forward 12 hours and set the correct time again.

Lorus watch date adjustment (analog)

For models with a date window:

1. Move the time to about 6:30 first.
2. Pull the crown to the first click and change the date.
3. Push the crown back in.

Avoid adjusting the date late at night (roughly 9 PM to 3 AM), when the watch may already be switching the date internally.

How to set Lorus digital watch (4-button models)

If you searched how to set the time on my lorus digital watch or how to set the time on lorus digital watch, this is the section you want. Most Lorus digital watches use four buttons that work like this:

• A = Light (top-left)
• B = Start/Stop (top-right)
• C = Set (bottom-right)
• D = Mode (bottom-left)

Even if your labels are slightly different, the behavior is usually the same.

Step-by-step: lorus watch set time on a digital model

1. Press D (Mode) until you are on the normal time display (not stopwatch or alarm).
2. Press and hold C (Set) for 2-3 seconds until the digits start flashing.
3. Press D (Mode) to move through fields in this order (common sequence):
   • seconds
   • minutes
   • hours
   • month
   • date
   • day of the week (sometimes auto-adjusts)
4. Use B (Start/Stop) to increase the value.
   • On some models, A (Light) decreases the value, or B increases and A decreases.
5. Press C (Set) once to finish and save, or keep pressing C until the watch exits setting mode.

That is the core answer for how to set time lorus watch on most digital versions.

How to change time on Lorus watch (when the hour is wrong)

If you are specifically searching lorus watch how to change time because the hour is off:

• Go back into setting mode (hold C).
• Jump to the hour field (press D until hour flashes).
• Adjust with B (and A if your model supports down).
• Save with C.

If the watch is off by exactly 1 hour, also check whether you accidentally switched 12-hour/24-hour mode.

12-hour vs 24-hour format

Many digital Lorus watches switch formats from the main time screen:

• Press B once (or hold it briefly) to toggle 12/24 on some models.
  If that does not work on your model:
• Enter settings (hold C) and look for a 12/24 field while stepping through with D.

How to set date and time on Lorus watch (digital)

If you need how to set date and time on lorus watch:

• Enter settings (hold C).
• Use D to reach month and date.
• Adjust values with B (and sometimes A).
• Save with C.

This also covers the common intent behind lorus watch date adjustment for digital models.

Lorus watch time and date RX770UX9 (model-specific note)

Some model searches include a full code, like how to set lorus watch time and date rx770ux9. Even when the screens look slightly different, the logic is usually identical: use Mode to reach the time screen, hold Set to flash, then Mode to select fields and Start/Stop to adjust. If your RX770UX9 behaves differently, the most important clue is this: you must get the digits flashing first – once they flash, the rest is just field navigation and value change.

How to set time on Lorus water resistant watch

People often search how to set time on lorus water resistant watch because they worry about damaging seals. The safe rule is simple:

• Always push the crown fully back in on analog models.
• Do not press buttons underwater on digital models unless your exact manual says it is allowed.
• After setting the time, check the crown and buttons are not stuck and the watch is dry.

Common mistakes (and quick fixes)

The watch won’t enter setting mode

• Make sure you are on the main time screen (not alarm or stopwatch).
• Hold the correct button (usually C) long enough. A quick tap may do nothing.

Minutes change but hours don’t

• You might be in a sub-mode (alarm setting) instead of time setting. Press D to return to time, then try again.

The day of the week looks wrong

• Set the correct year/month/date first. Many watches calculate the day automatically from the date.

Quick recap

For analog models, how to set time on lorus watch is crown out, turn to set, crown in.
For digital models, how to set lorus digital watch is Mode to time screen, hold Set until it flashes, Mode to choose seconds/minutes/hours/date, and Start/Stop to change values, then Set to save.